TRAMEX SKIPPER PLUS
 |
|
Non-destructive detection and measurement of moisture in wooden boats, GRP (Glass Reinforced Plastic) boat hulls, wooden parts, components, decks etc.
|
|
External rubber electrodes in direct contact with material being tested for best sensitivity, repeatability and greater depth of signal penetration.
|
|
Wide range of readings for wood of 5 to 30% on hard wood scale and 0 to 100 on comparative scale for GRP and other materials.
|
|
Large, clear, easy to read display giving meaningful readings
|
|
Automatic power cutoff switches "Off" when not in use to save Battery
|
|
Confirm if wooden boats are dry before painting or varnishing
|
|
Early detection before blistering appears
|
|
Identify extent of moisture affected area
|
|
Check stripped areas prior to re-coating
|
|
Deep signal penetration to detect elevated moisture through most covering and coating materials and deep into the core of composite hulls without having to damage or puncture the material being tested.
|
|
Hold function enables user to "freeze" the reading, useful when taking readings in awkward places where the meter face may not be visible.
|
|
Three measurement ranges optimized for testing of different materials such as hardwood, GRP and surface moisture.
|
|
High moisture audio warning tone that can be switched on or off
|
|
Identify the presence of moisture osmosis in fiberglass hulls
|
|
Check if racing boats are carrying excess moisture weight
|
|
Trace deck and bulkhead leaks
|
|
Monitor hull during dehumidification
|
