| Linear LS-6000
 | | Super-bright Xenon Tube and highly-polished hammertone reflector combines to generate industry-leading light intensity and uniformity | | Models are offered in 10 inch (250 mm) and 15 inch (380 mm) widths | | Internal and External control of flash rate and flash intensity (brightness) | | Steel enclosure is specifically-designed to efficiently dissipate heat eliminating the need for bulky heat sinks | | 2 or more LS models can be connected to each other for wider web coverage |
|
| | Linear LS-5-12000
| | Unmatched brightness, sharpness and uniformity from any strobe in its class | | Uses long-life Xenon U-tube which is easily replaced after 200 Million flashes | | Extremely short flash duration of less than 5 microseconds (µs) provides for a super-sharp image for easy observation | | Can be powered using 24V DC already available on the machine or using option AC-DC power adapter. | | Externally triggered using industry standard TTL-type square-wave signal at rates up to 208Hz and even higher | | Steel enclosure is efficiently dissipates heat eliminating the need for bulky heat sinks | | Two (2) or more LS-5 Strobes can be connected to each other for wider web coverage | | CE-certified for use worldwide | | Threading holes provided for fixed-mounting on machine frame or articulating arm |
|
|
| LED DT-329
| | 60 - 120,000 FPM (1-2000Hz) Flash Rate | | High Brightness: 1,950 lux at 120,000FPM @ 8 inches (20cm) to target | | Large “Illuminated” Area on web: 24" x 16" (600x400mm) | | No noise, No flash tubes | | Flash rate is controlled internally using manual dial, push button or via external trigger (sensor or controller) |
|
| | LS-5-RCU
| | Remote Control Unit for LS-5-12000 | | Create a trigger signal or influence a signal generated externally |
|
|
| LS-GAPSENSOR
| | The LS-GAPSENSOR is supplied with a DIN connector for direct connection from CHECK-LINE LS-10 & LS-15 linear strobes. | | Only label sensor on the market that is immune to the interference caused by a strobe. | | IP66/Nema 4 rating provides excellent physical protection and is waterproof. | | Supplied with a DIN connector for direct connection from CHECK-LINE LS-10 & LS-15 linear strobes |
|
| | LS-REGSENSOR
| | Includes remote Autoset™ and Selectable Pulse Stretcher | | Single, one pushbutton set-up | | Color Mark registration detection on transparent and translucent, including many metalized films and paper |
|
|
| | LS-5-UVKIT
| | UV Strobe Conversion Kit for LS-5-12000 Stroboscope | | Includes special UV Lens and flashtube needed to illuminate UV inks for inspection |
|
|
|
